Upon looking online it appears that a short depth 3/4 NPT Block Heater is required. My question is where does it go? The port I found would be my first guess but it appears to be 1in not 3/4 (haven't removed to verify)
M6060 Block Heater Location
- Thread starter RJ11928
- Start date
Thats where it is on the 7060. I got the block heater from Kubota. I dont remember it being expensive. It looks like 1" to me.
Per the dealer. Just in case anyone else needs it.
The part number for the Kit is 70000-73274. It is the 1" threaded pipe. Pull out the plug with the Hex drive and install the block heater.
The part number for the Kit is 70000-73274. It is the 1" threaded pipe. Pull out the plug with the Hex drive and install the block heater.
