Does anyone have a breakdown illustration of this pump?(attached) I'm looking for O-Ring part numbers for the O-rings that go behind the end cover. Or if I buy a parts list manual does it show this pump broken down into its individual pcs. Pump Part # is 36220-82200 (now replaced by 36220-82204)
M4500 Hydraulic Pump
- Thread starter mcnzder
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
You can get a full parts manual with part numbers from Messicks for free by going to their page and requesting the pdf files to be sent to you. Go here, and click on the "Parts diagrams" tab and go from there
http://www.messicks.com/wiki/kubota/m4500
http://www.messicks.com/wiki/kubota/m4500
Thanks for the responses
The rings needed are behind the cover (power steering end) held by the 6 Allen bolts that is not blowen apart in the picture.
Managed to get 5 of the 6 orings from the local k dealer.
The largest and most important one I got from a hydraulics place, a little large but by freezing it was able to make it fit and stay in place during assembly .
All is now fixed.....no more leaks
Thanks again for your help.
The rings needed are behind the cover (power steering end) held by the 6 Allen bolts that is not blowen apart in the picture.
Managed to get 5 of the 6 orings from the local k dealer.
The largest and most important one I got from a hydraulics place, a little large but by freezing it was able to make it fit and stay in place during assembly .
All is now fixed.....no more leaks
Thanks again for your help.