LX4020 ROPS lighting help

Agent Splat

New member

Equipment
LX4020 PR1672
May 9, 2026
1
0
1
WI
Hi there, I'm new here.
I have an LX4020 that I'm wanting to install forward and rear facing lights on the ROPS. Watched a bunch of videos and found instructionals online about it, but nothing specific for the LX4020. I cannot, for the life of me, find any sign of this magical "auxiliary light" connector that is supposedly somewhere on here. I read "under the left fender" or under the seat somewhere for LX and BX type models, but I find no open ended connections available. I don't see anything around the wiring that goes the the existing factory installed lights.

Anybody have insight? Thanks in advance.
 

Russell King

Well-known member
Lifetime Member

Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Jun 17, 2012
7,539
2,859
113
Austin, Texas
That connection is often wrapped with blue tape and then tucked away and taped down with black tape to make it disappear and difficult to find.

I would take a trip to the dealership and ask them to show you where it should be located.

Good luck!
 
  • Like
Reactions: 1 users