Loud noise(belt?) at startup

Sixmaxwells

New member

Equipment
Kubota L3560 & M4D-071
Mar 27, 2020
23
2
3
Callahan, FL
M4 with about 15 hours on it has just started making a loud screeching that starts right after startup and last about 10-15 seconds. Any known fixes for this?
 

boz1989

Member

Equipment
B2910 fel 60 mmm, Land Pride rb1572
Jun 10, 2015
269
6
18
54
Portland, MI
The first thing I would check is the fan belt. The draw on the alternator is at its highest at startup.
 

boz1989

Member

Equipment
B2910 fel 60 mmm, Land Pride rb1572
Jun 10, 2015
269
6
18
54
Portland, MI
Sorry, I would check the tension on the fan belt. The owners manual should give you a measurement of how far it should displace when you push on it. If it is too loose, the alternator could be slipping and causing that noise.
 

Sixmaxwells

New member

Equipment
Kubota L3560 & M4D-071
Mar 27, 2020
23
2
3
Callahan, FL
Sorry, I would check the tension on the fan belt. The owners manual should give you a measurement of how far it should displace when you push on it. If it is too loose, the alternator could be slipping and causing that noise.
ok very good. I’ll check that!
 

JimmyJazz

Well-known member

Equipment
B2601
Aug 8, 2020
1,099
644
113
Pittsburgh, Pa
In the old days we hillbillies would apply aerosol hair spray to a shrieking belt. This was before the internet was invented. It stops the noise. I cant vouch for its long term effectiveness. Just a suggestion and a look back without having to visit a museum. Good luck.
 

retired farmer

Active member

Equipment
tractor, loader, cutter, blade
May 25, 2020
168
86
28
sheridan
In the old days we hillbillies would apply aerosol hair spray to a shrieking belt. This was before the internet was invented. It stops the noise. I cant vouch for its long term effectiveness. Just a suggestion and a look back without having to visit a museum. Good luck.
Before us hillbillies had hair spray, we used a bar of soap on the belt to quiet a fan belt. ;)
 
  • Haha
Reactions: 1 user