davesl708
New member
Equipment
BX2200, LA211, RCK60B-22BX, 5ft. Rototiller, Rear Blade, 4ft Drag Harrow
I have a 2003 BX2200 with LA211 loader. Bought used. All worked fine for 10hrs. Changed dirty hydraulic oil, filter and cleaned screen.
At low rpm >1200, hydraulics work fine. Run up rpms and all hydraulics move very very slow.
I cleaned the control valve and installed new orings.
If I disconnect the red quick connect on the loader and reconnect system works fine until I run up the rpms.
Any ideas as to why the loss of hydraulics at high rpm?
Thanks,
Dave
At low rpm >1200, hydraulics work fine. Run up rpms and all hydraulics move very very slow.
I cleaned the control valve and installed new orings.
If I disconnect the red quick connect on the loader and reconnect system works fine until I run up the rpms.
Any ideas as to why the loss of hydraulics at high rpm?
Thanks,
Dave