I have a lx2610 with the cab and my glow plugs don’t work at all. No noise when I turn the key. I’m trying to find the relay to see if it’s bad but I’m having a hard time finding it. I have tried searching online but I’m not having any luck. Does anyone know where it is at for the models with the cabs?
Lx2610 glow plug relay
- Thread starter Joepence
- Start date
I had the same problem with my B2650. The connector that is on the load side of the relay were loose. I tightened them up and it has been working.
Not sure on your tractor,but on mine the relay is on a mount with a couple other relays just behind the AC compressor.
I was surprised how cheap a relay setup that Kubota used for such a high current circuit.
My plan is to change it to a better weather tight relay at some point. Number 563 on the list of stuff to do.
Not sure on your tractor,but on mine the relay is on a mount with a couple other relays just behind the AC compressor.
I was surprised how cheap a relay setup that Kubota used for such a high current circuit.
My plan is to change it to a better weather tight relay at some point. Number 563 on the list of stuff to do.
Just an FYI----the glow plugs don't make any noise when you turn the key to the glow plug position, but you should hear the fuel pump making noise even before you get to the glow plug position.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more