Land Pride QH15 and the bargain deal Ag Supply Adapter for a Scraper Blade.

[100AkerWood]

Finally got caught up with playing on my tractor and got down to seeing how the LP QH15 would do with a scraper blade and $19.99 Ag Supply adapter.

i installed lower link adapters and the Ag Supply forked upper link adapter on the blade scraper. I removed the top link hook off the QH15, i backed the tractor up to the scraper, removed top link pin and flopped over the adapter and replaced the top pin.

i backed the tractor up, lifted the QH and threw down the levers. No adjustment needed for the scraper. I can say the $19.99 adapter had me wondering, but it was hitch-n-go in a few minutes. Sure beat struggling, adjusting, and sweating to get an implement attached (even with a bent lower link).

 

[Mossy dell]

Nice. I THINK your hook is designed to snag that forked adapter. Might save you some time if you don't have to take the hook off.

 

[100AkerWood]

MD,
I looked at that...It seemed that removing the hook was easier in keeping the geometry the same even for my ballast box and rotary cutter...so I wouldn’t need to muck around with leveling individual attachments with the top link at all or adjusting the hook up or down a hole or two.

Your input is greatly appreciated....I am still playing with QH options...sure beats the heck outta pry bars and sledge hammers to align and mount lower link pins..