LA535 loader subframe question

[AOW162435]

I purchased my LX2620 and LA535 loader in the Spring of last year. At some point a few months ago it hit me that the loader arms are slightly off center. If I sight down the hood while seated, the left arm is closer to the hood than the right.
Before I dig into it, does anyone know if the subframe has oversized mounting holes? If so, I would simply loosen the various bolts, shift/skew the assembly left, and retighten.

Andreas

 

[TheOldHokie]

I purchased my LX2620 and LA535 loader in the Spring of last year. At some point a few months ago it hit me that the loader arms are slightly off center. If I sight down the hood while seated, the left arm is closer to the hood than the right.
Before I dig into it, does anyone know if the subframe has oversized mounting holes? If so, I would simply loosen the various bolts, shift/skew the assembly left, and retighten.

Andreas

This strikes me as a solution looking for a problem.

Have you considered the possibilty the hood is whats "off center" or that it really does not matter?

Dan

 

[North Idaho Wolfman]

Put a level again the back of the towers are they at the same exact angle?

 

[AOW162435]

Put a level again the back of the towers are they at the same exact angle?

I will check in the next couple of days and report back.

Andreas