LA525 loader control valve cover

[ken erickson]

I took my tractor down to the land today to start clearing for a 27 x 24 tractor shed.
Half way thru the loader control falls apart and the joy stick flops all the way down.
Not a huge deal but in my situation complicated getting back to where I parked my wheelchair as the loader was in float position when the control stick fell apart. I am not sure if part 070 pulled the threads from the control stick part 110. I was not able to drive forwards without the grapple trying to dig into the soft sandy soil. . With the cover on it was impossible for me to get it back together and of course no tools with me.

Anyways before I run back down with tools can someone confirm that its just the one bolt numbered #290 that attaches the cover to the rest of the assembly

?

 

[Fordtech86]

If nobody posts an answer before I get home tonight I will check mine and let you know.

 

[Justasquid]

This is not my picture as I don’t have a 525 loader. But this is a 3901 which may have the same controller as yours. It looks like 3 bolts hold the cover on. But again, not my picture and only a guess.

 

[MSG H]

It has 3 - 10mm bolts holding the cover on. Looking from the bottom of the vale. Right side - top and next one down. Left side- top. I didn’t take the lock out knob off, just slid the cover over it.

 

[ken erickson]

Thanks guys! Exactly what I needed.