LA434 inside width dimension?

northcop

New member

Equipment
Kubota BX25D
Sep 11, 2013
24
0
1
Thunder Bay, Ontario, Canada
Hi there folks,

A friend of mine is looking to get a piranha tooth bar for a gift for someone. The loader is a LA434. They want it to be a surprise so can’t actually measure the inside width themselves. Wondering if any of the tractor gods on here might know that particular measurement off hand? Any help would be appreciated. Take care all!
 

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
3,490
5,213
113
Wind Gap, PA
I think that there are two options for that loader. Is it on a B2601? If so, I believe that they can be had with either a 54" or 60". I'm afraid they will simply have to measure it.
 

michigander

Active member

Equipment
B2601
May 29, 2018
547
234
43
Northern Michigan
I figured simple to measure 54" bucket I'm wrong..

Looking at there web site how to measure this could be a bad surprise.

you could cut a 2 by 4 @ 52 1/4 inches and see if it slides in bottom of bucket where reinforcement plates are.
 

miketrock

Member
Nov 25, 2019
163
18
18
Pa
Actually, LA434 is the LOADER (arms and lifting hydraulics), what you need is the "inside to inside" bucket measurement. The bucket could be either a 54" or 60". Somebody will have to sneak around and get a measurement, or see if they can gat a bxpanded gift certificate for one, they have them from $10 to $500.