My LA 845 bucket won't fully retract, it will fully dump and raise mad lower but only retract half way. Ideas?
Thanks
Thanks
La 845 problems
- Thread starter Calvin1420
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Check all the pins, linkages, and movement, if all is good there it sounds like a bent rod on a piston and or a bad piston seal.
Last edited:
I found the problem. Wasn't hydraulics but a pin was missing a securing bolt. Fixed easily.
Thanks.
Thanks.