L35 hydraulic problem

[Dommer]

Hello. Recently had the clutch replaced in my L35. I didn't do any of the work. Anyhow, the tractor drives around fine but now whenever you need to raise the bucket you have to give it a good amount of gas. Everything was working fine until the clutch got replaced.
Any feedback would be appreciated.

 

[North Idaho Wolfman]

Most likely cause is it's sucking air.
When the split the tractor the have to split the hydraulic system too.

Check all these hoses and fittings, there could be a loose clamp or pinched O-ring.
a leak on these hoses or fittings will sometimes not leak fluid as it's a suction line, it will just suck in air when it's running.