I recently purchased a L345DT tractor. It has a few issues to be resolved, and I have a few questions the manual does not cover. The first one that has me stumped is the shift levers. Does anyone else have this type trans on their Kabota? If so, what does the left shifter do? Mine does not seem to want to move, so I have yet to figure out its purpose. Thanks! Larry
L345DT transmission shifter's
- Thread starter Foxtrail Forge
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
The lever behind is high/low and moves. It seems to do the same as the lever on the left out of the picture. But the upper left "says" PTO but does not seem to want to move. Does it shift the PTO in and out or does it change PTO speed?Front left is the PTO lever.
Russell King
Well-known member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
The front lever should shift the PTO speed.
In the neutral position the speed = zero
In position 1 PTO speed = 540
In position 2 PTO speed = ???
On my tractor the PTO has three numbers (1, 2, 3) so I have no idea how many speeds yours is but I am pretty sure that 1 is 540 RPM but not positive!
Search on the forum and I believe you will find similar questions and answers. I recall reading about something similar to your questions but could not find it.
In the neutral position the speed = zero
In position 1 PTO speed = 540
In position 2 PTO speed = ???
On my tractor the PTO has three numbers (1, 2, 3) so I have no idea how many speeds yours is but I am pretty sure that 1 is 540 RPM but not positive!
Search on the forum and I believe you will find similar questions and answers. I recall reading about something similar to your questions but could not find it.
Last edited: