I've got a recently acquired L3240D w/FST transmission. I hooked up my bush hog and engaged the PTO lever and the PTO shaft spun up the bush hog just fine, but the dash indicated PTO OFF when I tried to check my PTO speed. After a little while of running the bush hog, the red/orange PTO running icon popped up on the dash and the PTO speed was indicated. This happens pretty much every time I engage the PTO. I suspect a switch isn't consistently making up and may need adjustment. I've got the owners manual, but not a service manual (yet). Any ideas where to look?
On another note, I tried to search the forum for PTO engaged indicator, but the search doesn't like the term PTO. The term PTO is pretty important on a tractor forum. Is there a way around this search limitation? I tried PTO* and PTO%, but it didn't like either of those options.
On another note, I tried to search the forum for PTO engaged indicator, but the search doesn't like the term PTO. The term PTO is pretty important on a tractor forum. Is there a way around this search limitation? I tried PTO* and PTO%, but it didn't like either of those options.
