My pto on my L2250 quite working today and I need some help. Here is a little history. The tractor was an airport tug for almost 20 years and was then sold. I guess I'm the third owner. The pto lever was removed for airport service. 4 years ago I talked to the dealer that did the job and he told me how to add the lever and now it has duel range pto. Anyway, I was tilling and the tillers shaft slipped off. I tried to get the pto in nuetral but it wouldn't go. This happens sometimes but not often. So I turned the tractor off and put the shaft back on. When I restarted the tractor the pto would not work. No high or low range, no noise but the lever does not feel like it is catching on anything. The fluid is good and the clutch and everything else seems fine. Because my manuels are from the airport there isno pto information. I have looked up a schematic but it's not helping much.
Thats the long of it. Any one have any advise of where I should start to try and get it working?
Thats the long of it. Any one have any advise of where I should start to try and get it working?