Here's another thread for my L175, so I think something is horribly wrong with the wiring for my kubota since it does not have working lights anymore and this weird glow plug smell and also the key I put in and click 4 times to the right now only goes 2 clicks.... this was for my lights to work and they now dont ... will also update on that.
Anyways for the switch when I turn right to start it has no issues but I don't want to bump the starter for too long either to cause problems since its the oem starter, when turning this switch to the left to activate the glow plus I believe the light on the tach works and after a few seconds a putrid smell starts coming with smoke if I remember correctly...... reason being is that sometimes when its cold and I dont use the plugs it will not start quickly and I have to hold the starter but when I use the glow plugs (with that burning smell) afterwards it then starts with a cloud of black smoke and then idles normally.
Anyways for the switch when I turn right to start it has no issues but I don't want to bump the starter for too long either to cause problems since its the oem starter, when turning this switch to the left to activate the glow plus I believe the light on the tach works and after a few seconds a putrid smell starts coming with smoke if I remember correctly...... reason being is that sometimes when its cold and I dont use the plugs it will not start quickly and I have to hold the starter but when I use the glow plugs (with that burning smell) afterwards it then starts with a cloud of black smoke and then idles normally.