Does anyone know if any usable information can be obtained by using an OBDII adapter on a Kubota, can DTC's be cleared? I see a lot of adapters for sale, but little information about how useful they are. Anyone have any experience with these adapters?
kubota OBDII Adapter
- Thread starter Harley Monster
- Start date
OBD2 is federal mandate for on-road vehicles, tractor manufacturers do not have to comply and may have proprietary systems for diagnostics.
Old Machinist
Well-known member
Equipment
Kubota LX3310 cab, JD 4310, NH 575E cab backhoe, JD F725, Swisher 60", etc.
My LX3310 has instructions for reading and clearing codes on the dash display in the service manual. Not sure if your model does but you might want to get hold of a manual for it.
In general, you will have trouble simply establishing a connection let alone executing any commands.
Dan
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
You will not get a non kubota computer system to be able to read or reset the codes, they do not follow standard OBDII programing.
You already know the answer, and I know you don't like it, but you will need to take it to a dealer to read and reset it.
You already know the answer, and I know you don't like it, but you will need to take it to a dealer to read and reset it.
Trying to use an OBDII scanner on a tractor is not like apples and oranges. It's more like apples and alley cats.