Its acting as if you got the blade in the float position all the time except when raised up..i cant find anything on how the blade float works on it and how to check it to see if its stuck open
Didn’t realize excavator blades have a float function. My little excavator doesn’t.
The check valve block shown in post 8 would disable float if it were used. But it’s operation would be automatic and not require any action on the part of the operator.
Sounds like a normally closed closed electric valve in the line would work, but then to use float you would have to hold the button all the time. Or have a switch there also...
Are you sure there is a float function? Or did you mean it is acting like it has a float function and is stuck in float?
There is a heavy equipment forum that I have a link to somewhere. I will post the link if I can find it. You might find it with google. I think I remember an excavator sub forum there. You might get more specific help there.
There is also an excavator sub forum under Related Equipment (or similar) at TBN.