Identifying hydraulic lines on B8200 with Loader and Remote block.

[Bill Kalbo]

I just picked up a B8200 with a loader and a remote block that is unused. There are 3 metal hydraulic lines with quick disconnects that end right in front of the brake pedal on the right hand side of the tractor. From there, rubber lines run up to the loader and remote blocks.

Before I start playing around and guessing, does anyone know the use of each of these 3 quick disconnect lines? I checked the WSM but can't find the lines so it might be part of the loader installation.

If it makes a difference, I want to remove the remote hydro as it’s mounted in an awkward position that my leg keeps banging into. My concern is that when I remove the remote hydro that I don’t mess up the loader.

Thanks

 

[kenrevo]

Those pipe are part of the loader installation. The top one is pressure, the middle is the power beyond and the bottom is return to tank:

 

[Bill Kalbo]

Thanks Kenrevo. I knew you guys would have the answer.