Hey, Dummy

chim

Well-known member

Equipment
L4240HSTC with FEL, Ford 1210
Jan 19, 2013
2,592
1,839
113
Near Lancaster, PA, USA
Yep, me. Apparently I can't always tell the difference between yellow and white. My loader is not on the tractor unless I'm using it. Otherwise it's in the shed in front of the tractor. The weather today was nice enough to get out and start some fab work and the loader was part of it. I connected the hoses and moved the joystick to get the loader on. It dumped just fine and the arms rolled into the brackets. However, when I pushed forward on the stick, the loader didn't push down, it lifted. Hmmm. Up was down and down was up. This was a first, but it didn't takes more than a few seconds to figure it out. I backed it out of the shed, shut it down, dropped the bucket and swapped the lines. All is fine now:)
 
  • Like
  • Haha
Reactions: 4 users

chim

Well-known member

Equipment
L4240HSTC with FEL, Ford 1210
Jan 19, 2013
2,592
1,839
113
Near Lancaster, PA, USA
Color code or polarize the connectors
" Apparently I can't always tell the difference between yellow and white"

That's the bad part. They are marked:) In my defense, the shed was a little dark after coming in from the bright sunshine.
 
  • Haha
Reactions: 1 users

hedgerow

Well-known member
Jan 2, 2015
377
350
63
Malcolm NE
" Apparently I can't always tell the difference between yellow and white"

That's the bad part. They are marked:) In my defense, the shed was a little dark after coming in from the bright sunshine.

As I get older and glasses don't help I find myself turning on the tractor lights more when hooking up in the sheds. I have many cold storage sheds with no power.
 

RCW

Well-known member
Lifetime Member

Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Apr 28, 2013
10,066
6,882
113
Chenango County, NY
Chim - a while back I mixed up the two connections on my snowblower.

Don’t remember what I screwed up, but I did.
It happens….
 

NorthwoodsLife

Well-known member
Lifetime Member

Equipment
Kubota B7100(sold), Kubota LX2610 Cab
Oct 15, 2021
1,248
1,234
113
Wisconsin
It could have been worse. I do electrical stuff. 110, 277, 480. I have mixed the wires a couple times on a long day and live to tell.
Only small fires and a big flash for fun.
 
  • Like
Reactions: 1 user

GeoHorn

Well-known member
Lifetime Member

Equipment
M4700DT, LA1002FEL, Ferguson5-8B Compactor-Roller, 10KDumpTrailer, RTV-X900
May 18, 2018
6,156
3,450
113
Texas
I know the “dummy” routine.

I pulled my boat to the marina for service today and realized I forgot to store-away my custom/special trailer hitch-lock. As I hitched-up last nite I laid the lock on the truck rear bumper and made a mental note to store it properly before hauling the boat to the marina service center today.
About half-way to the marina today, I realized I’d forgotten that lock…. got out and checked the rear bumper… nope…not there… so on the return home I scoured the roads looking for it. I back-tracked twice more, spending almost an hour looking for it. No luck.

This evening a friend had a flat on the hiway and called to see if I’d bring him a floor-jack and help him change his tire. (His brand new truck had a flat…. but didn’t have a jack.)

As we finished the tire-change I was putting my floor-jack back in my truck…. and there…..inside the pickup bed…. was my trailer lock. 😳

I‘ve noticed I’m getting distracted/forgetful these days. I left the kitchen stove—top burner ON for the 3rd or 4th time lately drying out a cast-iron skillet after washing it. I left a sink faucet running the other day for several hours and only discovered it by accident.

The doc has checked me for alzheimer's every 6 mos during regular check-ups. He gives me 4 or 5 random words at the beginning of the visit and 15 mins later asks me to repeat them. (one of was analogous… so I deliberately responded “anorchous” LOL
 
Last edited:
  • Love
Reactions: 1 user

Hoserman

Well-known member

Equipment
Kubota BX2380 Land Pride Box Blade
Aug 1, 2022
195
316
63
Grayling, MI.
I won't even get into talking about the mistakes I have made. I'm like Northwoods, and I was an industrial electrician like FOREVER! Most of my work was in the 440 v range. When you make a mistake you bloody well know it. 😜🤪😂
 
  • Like
Reactions: 1 user

GeoHorn

Well-known member
Lifetime Member

Equipment
M4700DT, LA1002FEL, Ferguson5-8B Compactor-Roller, 10KDumpTrailer, RTV-X900
May 18, 2018
6,156
3,450
113
Texas
I would worry about anyone washing a cast-iron skillet with water! The other things, not so much.
Here’s some “thread-drift” for ya’:

There is considerable differences of opinion out there on how to care for cast-iron.
The most common is “Never use soap/water” to clean it….because it “ruins the seasoning” .

This is an old wives tale….the background of which is rooted in the 18th/19th century …when women and travelers did not have ready-access to water.
Imagine traveling by wagon or cart or foot on the Westward-movement. Water was a prime concern. Stops were hopefully found at stream-crossing where water was available.
Otherwise, the cast-iron pots were scraped-out of food-particles, and cooking-grease or lard was used to prevent rust. This becomes a non-stick coating that became known as “seasoning”.
It wasn’t specifically planned-for as a non-stick surface….That was simply a side-benefit. The reason the pot wasn’t washed was: Water was precious, especially when traveling. (The two barrels on the side of the wagon was water for the harness-animals and people…. and the other was corn or feedstock for them.
Using water for washing was simply not prudent Or possible.… and the concept of “germs” was completely unknown. The act of cooking in that cast iron post had a fortuitous side-benefit as regards germs…. and “soap” was usually “lye”…used primarily for clothing, etc when a stream/river was available.

Modernity has changed all that. But habits and “old sayings” die hard.

”Seasoning” a new skillet is a universal ritual, mostly due to tradition and unfamiliarity with the real reason it was ever the practice. Using a quality fat or oil to “season” new cast-ironware is good.
But there’s simply no good reason to worry about “ruining” cast iron with proper washing using dish detergent and water. (Simply scraping food particles out with a spatula and leaving the pot with grease in it is NOT necessary OR Good for you…. it allows minute food particles to spoil and feed germs… and the ritual lard or animal fat used to prevent rusting will spoil and become Rancid… ruining the taste of newly-cooked food and contributing to the possibility of food poisoning.

Good modern care:
When finished with cast iron, scrape food away, …then use hot water and dish detergent along with a stainless-steel “scrubby” (pot-scrubber) …to scour and clean the cooking surfaces completely. After many months and years of using that metal pot-scrubber….your cast-iron will slowing acquire a very smooth and “slick” surface.
Rinse with hot water thoroughly, then place the cast iron on a stove-top burner …or inside a hot oven…. to thoroughly Dry the iron.
Next, use a few drops of Olive Oil on the cooking-surfaces and spread it thinly with a paper-towel while the pot is still hot, and store it away. Do not worry about the “seasoning”.

Next time you use it…simply wipe it out with a paper-towel… and Enjoy It!
 
Last edited: