My B6100E throttle was stuck to the engine stop lever and as such I was using the decomp pull to kill the engine. I've freed it up and reattached the foot throttle, but seem to be a bit loss and the schematic I found is poorly displayed. I can't figure how the hand throttle would stay in place and what it should look like in relation to the engine stop lever. I am also unsure how the spring for the engine stop lever should be oriented. Any pics or videos would be greatly appreciated. SIDE NOTE: LOTS OF YOUTUBE VIDEOS SHOW OWNERS USING THE DECOMP PULL. KUBOTA STATES THIS SHOULD BE EMERGENCY ONLY.