GR2100 starting problems

CaptainHaddock

New member
Aug 10, 2019
2
0
0
Groton, MA, USA
GR2100 diesel. Battery is fully charged. Have removed and tested starter motor & solenoid and working fine.

I switch the ignition to glow plug warmup and get click, but when advance to crank engine over nothing happens.

Assume may be bad earth, but for life of me cant find where to check earth connection .. any guidance or photos would be of great help.

Any other suggestions would be welcome!

thx v much
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
33,961
9,171
113
Sandpoint, ID
Sounds like it could be a safety switch or the OPC is stopping it from cranking.

Have you checked fuses?

Get the WSM (aka service manual) and have a test light handy.