Looking for a parts manual to identify the part number of the coupler disk that goes between the tractor side and blower side of the PTO drive, just before the gearbox on the snowblower.
Any ideas?
Any ideas?
G2505 / G2500 Snowblower - coupler needed
- Thread starter 2seatPilot
- Start date
Do you have the Operators Manual?
These images are from the manual which is available for free on:
Kubotabooks.com
Unfortunately the manual does not include part numbers.
Please confirm I have identified the part you are looking for.
I think you will find most parts are NLA for no longer available.
Dave
These images are from the manual which is available for free on:
Kubotabooks.com
Unfortunately the manual does not include part numbers.
Please confirm I have identified the part you are looking for.
I think you will find most parts are NLA for no longer available.
Dave
Last edited:
Do you have remnants of #13?
Look at this steering shaft flex coupling.
Consider making your own by cutting a piece of rubber from a truck tire side wall.
Rubber cuts much easier with a knife if the tire is wet.
Dave
That’s an interesting idea, I may have to try that.
I do have the remnants of the part, it’s actually made of what appears to be fibreglass or something, about 1/16” thick.
I do have the remnants of the part, it’s actually made of what appears to be fibreglass or something, about 1/16” thick.
The L35 uses a similar coupling (actually 2 of them) driving the front pump. Messick's.com has a picture with a scale so you could compare the size with yours. $19 ea. The parts diagram shows sets of 2 but I don't remember seeing 2 on my L35. They are fiberglass. I was going to try the tire trick if I needed to.
Russell King
Well-known member
Lifetime Member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Kubota has an online parts catalog in USA. I assume you’re able to get something similar in Canada or access the US site.
I think Messicks has the same illustrated parts list also
Kubota.ca has a parts list for various versions of the T4200 but nothing on the blower.
I could also not find the blower on Messicks.
There is a blower shop manual and parts list on ebay.com for $90
Dave
As Dave said, online parts catalogues do not seem to be readily available for this particular blower. It seems to be a bit of an anomaly in the system.
$90 on eBay? Good grief... That's nearly $2 per part!!
$90 on eBay? Good grief... That's nearly $2 per part!!
Thank you! I'll check that out - that's what the local dealer is hoping to do too - find a similar part on another unit.
Somehow I always manage to buy things with NLA parts.
By my guesstimate, 6mm diam on 45mm centers:Thank you! I'll check that out - that's what the local dealer is hoping to do too - find a similar part on another unit.
Somehow I always manage to buy things with NLA parts.
Looks like the part... I'll compare measurements when I get home, and see if the local dealer has one in stock.
Well, rats. Just measured the remnant that I have and it’s 3 inches in diameter. Bigger than one posted above.
Attachments
Well, we think we found a part that will work, it is used elsewhere on the G4200 tractor. PN H6601-13510. (Supersedes 66031-13510)
$82 CAD.
ouch.
$82 CAD.
ouch.
Last edited: