Recently bought a 48" BB2048 Frontier box scraper. I have the lower arms for the 3 point but not the top link. As I measure it out the distance from the top link hole to hole is 25 inches. That seems really long to me could that be right?
Frontier box scraper on a B6100
- Thread starter orangerust
- Start date
1980 b6100
My lowers are 23”
My top link is about 21.5” when I use my country line 48” box blade.
Sent from my iPhone using Tapatalk
My lowers are 23”
My top link is about 21.5” when I use my country line 48” box blade.
Sent from my iPhone using Tapatalk
I bought this one to use with my box blade and sub soiler on a b7100:
https://www.agrisupply.com/top-link-cat-1-14-1-2-fit-kubota/p/106099/
As you know the top link needs to adjust both shorter and longer than your bottom arms so you can tilt the box blade up and down. This one adjusts from 19 to 25 inches.
Your lower arms seem long to me if they are 25 inches out. Perhaps show us how you are measuring?
I can measure mine in the morning and post photos if you want. Not sure the 6100 dimensions are the same although some else likely does.
https://www.agrisupply.com/top-link-cat-1-14-1-2-fit-kubota/p/106099/
As you know the top link needs to adjust both shorter and longer than your bottom arms so you can tilt the box blade up and down. This one adjusts from 19 to 25 inches.
Your lower arms seem long to me if they are 25 inches out. Perhaps show us how you are measuring?
I can measure mine in the morning and post photos if you want. Not sure the 6100 dimensions are the same although some else likely does.