I bought a B2400 last winter. It is a 1998. I plowed snow with the bucket but it takes forever. We had 4 storms with over 12" and I have a large driveway. Is there a way to attach a plow to this? Also, can I attach a backhoe to this series. The guy at the Kubota dealership said it would be bad for the frame, but he wanted to sell me a new one. Thanks for any help!
Front plow for B2400
- Thread starter MaineTractorGuy
- Start date
I have a 5.5" Arctic aftermarket plow on my B2400, Electric over hydraulic but I've since converted to full hydraulic.
It's connected to the front of the frame via 3 bolts on each side.
You can see it in these pic's.
I know there are "Kubota" plows that utilize a "quick connect" subframe that hangs under the tractor, attaching at the front and rear of the tractor's frame.
I've also seen frames that attach just behind the front wheels on the frame.
.
It's connected to the front of the frame via 3 bolts on each side.
You can see it in these pic's.
I know there are "Kubota" plows that utilize a "quick connect" subframe that hangs under the tractor, attaching at the front and rear of the tractor's frame.
I've also seen frames that attach just behind the front wheels on the frame.
.
I was fortunate enough to locate and purchase a used Kubota B2019 Front Blade with hydraulic lift/angle and down pressure for my B2400. I fabricated a mount for a valve and bought a 2 spool valve on Ebay. I used it for years and I just traded in the B2400 and now have a B2650, I have modified the plow frame and made brackets for the rear frame mounts and attached it to the B2650 for the winter ahead. With the new tractor I am able to utilize the loader valve to operate the front blade so I no longer need a separate valve.... If you can find a used B2019 front dozer blade grab it!
Attachments
Here ya go Mainetractorguy....... I found this near Kalamzoo Mi. https://kalamazoo.craigslist.org/grd/d/kendall-kubota-front-blade-controller/6982033418.html
Road trip!
Road trip!