Foot operated manual 3rd function.

[Superjet511]

Hello all, I wanted to share the 3rd function kit I built. When shopping for a 3rd function kit, I didn’t care for what was commercially available. I wanted to avoid a kit with electrical components that could go bad and wanted to be able to control the speed of my attachments which isn't possible with the kits that are commercially available. I ended up building exactly what I was looking for and absolutely love it. What are your thoughts?
Here is a link to a video I made.

-Justin

 

[ken erickson]

It is always good to see thinking outside the box and modifications such as this one! Thanks for sharing, I seem to remember seeing a early version on one of the Youtube channels?

While it is a modification I personally could not use I can see the advantages. I have a Landpride 3rd function kit installed and while I keep my tractor undercover and does not sit out in the rain or snow it is always in the back of my mind when and if a switch or solenoid quits working.

 

[Trimley]

@Superjet511 Good Morning.

Nice work!

Are there any plans to have a kit, also for the BX Series (BX23s)?

 

[mcfarmall]

Nice job! Very professional looking!

 

[Yotekiller]

Would liked to have seen it operate in the video. I think there is a use for this. It's always nice to have options!

 

[TheOldHokie]

Nicely done - construction equipment does that a lot. You can buy the valve ready to mount.

Single foot pedal valve / two-way pedal valve for excavator

Explore top-quality Hydraulic Foot Control Valves for hands-free precision. Elevate your equipment's performance with our range. Buy now for improved control.

imaraengineeringsupplies.com

Dan

 

[#40Fan]

I saw something similar. I think it was on one of TTWT videos. Heck, might have been the bolt on hooks guy that was talking about it on Tim's video.

 

[Trimley]

I would consider the foot controls over others. With a little more refining, the valve and hoses "could be" moved under the floorpan.

 

[Superjet511]

@Superjet511 Good Morning.

Nice work!

Are there any plans to have a kit, also for the BX Series (BX23s)?

 

[Superjet511]

Thank you! Not at this time. I plan to make one for the Grand L cab, but only because I have that machine. Without other models on hand, designing a system like this would be difficult.

 

[Superjet511]

Would liked to have seen it operate in the video. I think there is a use for this. It's always nice to have options!

 

[Superjet511]

I will make another video of it in action. Unfortunately I am too busy running my business to get any seat time!

 

[Superjet511]

Nice job! Very professional looking!

Thank you! I appreciate that!

 

[Superjet511]

I would consider the foot controls over others. With a little more refining, the valve and hoses "could be" moved under the floorpan.

There are a lot of constraints to work with, this seemed to be the cleanest method while keeping all of the hoses out of harms way. I wanted to avoid having anything underneath.

 

[Superjet511]

I saw something similar. I think it was on one of TTWT videos. Heck, might have been the bolt on hooks guy that was talking about it on Tim's video.

Not sure. Would like to see what others have come up with if you see it again.

 

[mikester]

I will make another video of it in action. Unfortunately I am too busy running my business to get any seat time!

Thanks for posting the pics.

I generally don't look at the videos as I find I don't have the patience to listen to 10 minutes of blah blah blah blah listen to me talk blah blah blah only to see less than 5 seconds of what really counts.