Error code

[20 Farmer]

I am showing an error code 20 ng on my "display "all the info I can come up with is take it to dealer. what is the problem and is there a scanner out there that will read Kubota codes?

 

[sheepfarmer]

No scanner. Error 20 is communication Error between the ECU and the Intellipanel. Some piece of wiring is disconnected or short circuited. Check the main ECU connector. there is a lot of this stuff in shop manual. The connectors are near where your feet go, so maybe easy to get dirty.

 

[GreensvilleJay]

if CANbus tech, yes it's very 'finniky' about connectors, terminations,etc. Unplug, clean, reconnect,secure wiring, restart see what happens.