Engine Stalling Issue

C

countrynerd

New member

Equipment
BX25D, L3301
Jun 6, 2016
119
0
0
thumb, MI, USA
Engine would shake and almost stall if trying to move and not idle smoothly. Was not sure what issue was but drained fuel tank and filled again after going through a water filter.

Then ran at idle for hour and problem gone now (or is it). Did this to get whatever was out of line...

Think any damage came to engine or other thoughts?

I just assume bad gas or maybe water, but tractor filter should have stopped water?

BX25D





Sent from my iPhone using Tapatalk
 
armylifer

armylifer

Well-known member
Lifetime Member

Equipment
BX1860, FEL, RCK54P MMM, BB1548 Box Scraper, Quick Hitch, Piranha Bar, BX6315
Mar 26, 2013
2,145
916
113
Thurston County, WA
If you did any damage to the engine you would certainly know it after running it for a half hour. I think that you should be okay. I would change the fuel filters though.
 
85Hokie

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,977
2,831
113
Bedford - VA
countrynerd said:
Engine would shake and almost stall if trying to move and not idle smoothly. Was not sure what issue was but drained fuel tank and filled again after going through a water filter.

Then ran at idle for hour and problem gone now (or is it). Did this to get whatever was out of line...

Think any damage came to engine or other thoughts?

I just assume bad gas or maybe water, but tractor filter should have stopped water?

BX25D


Sent from my iPhone using Tapatalk
Click to expand...
You really did not mean "bad gas" did you?:D:) try one of these, does a great job for keeping everything in the fuel system clean

https://www.amazon.com/Mr-Funnel-AF...coding=UTF8&psc=1&refRID=Q3RAJ2T8NGJFSXJ88M6P
 
C

countrynerd

New member

Equipment
BX25D, L3301
Jun 6, 2016
119
0
0
thumb, MI, USA
Ended up changing out first filter after tank. The test did not think till after was unscrew bleeder see if fuel coming out well enough.


Sent from my iPhone using Tapatalk
 
85Hokie

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,977
2,831
113
Bedford - VA
countrynerd said:
Ended up changing out first filter after tank. The test did not think till after was unscrew bleeder see if fuel coming out well enough.


Sent from my iPhone using Tapatalk
Click to expand...
On the BX25 (and 70 series) you do NOT need to bleed the screw......

You replace filter(s) and then hold the key to the right (right before glow) - with key on, the fuel pump will pump fuel through everything and return it to the tank - air is gone.:)
 
You must log in or register to reply here.

Top Bottom