I won't bore you with the 'how did we get here' story, but I cannot find the correct 4 pin connector type for the LX2610 3rd function handle harness. I have been looking through Japanese connector books and using AI for two days and cannot locate these......Anyone have any thoughts or experience? This is the Kubota brand 3rd function with handle P/N 7J066-84015. I have pictures of both the female and male connectors and still cannot come up with a replacement!
Electrical Connector Identification Help.....
- Thread starter LXHobbyFM
- Start date
There's going to be numbers and possibly a logo somewhere on the connector- probably need a magnifying glass.
Find those marks then update the post.
Find those marks then update the post.
Possibly Yazaki....going through the book but no luck yet. There's another thread here related to the B2650 with people trying to ID tractor side harness connector that turned out to be Yazaki and appears to be the same plug driving the valves on the LX2610 3rd function harness. I had the same thought on plug markings......here's what I got (marked it for clarity), but not providing much more info.....
Attachments
There is only one with any writing.....the third. Comes up clear for me on the phone zoomed picture.
Russell King
Well-known member
Lifetime Member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Do you have enough slack in the wire(s) to be able to just cut both male and female connectors off and install a new more easily obtainable 4-pin plug set?