Getting an E-NET error code on my M110GX. Service Manual says "CANBus wire is short circuited". This error happened after a battery change. IO have traced the lines and see no sign of rodents that could have chewed through a wire so I am afraid I may have zapped one of my ECUs but not sure how to troubleshoot. Tractor will try to crank but just turns over. Left panel displays "Can BUS". Any ideas???
E-NET error
- Thread starter CottonValley
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
You're most likely going to need dealer intervention, they can read the system and find out what is going on.
I would check all the fuses first.
I would check all the fuses first.