Clutch for hst

[Lazy F farm]

My m135x clutch does not engage till it is at the top travel. How to do adjust this so it will start working lower

 

[greenacresnorth]

being as thats a powershift/shuttle shift, the clutch is more a inching pedal than a real physical clutch pedal. the only way to possibly bring the grab point down would be to change the lever geometry witch is next to impossible without modifying everything.

 

[North Idaho Wolfman]

If your wondering/worried about this from a Clutch is worn point of view, it's not.
The clutch pedal just engages/disengages a switch no an actual disk.

There might be some adjustment to the switch to change it slightly, but I wouldn't count on much.

Get the WSM (aka service manual) to adjust it if possible.