D Dad03 New member Equipment L3200HST Sep 17, 2011 34 0 0 Columbia, TN Sep 20, 2011 #1 When replacing the seal do I need to pull the housing to tap it out or can I get it done simply by pulling it from the outside and replacing it.
When replacing the seal do I need to pull the housing to tap it out or can I get it done simply by pulling it from the outside and replacing it.
osut362 Member Equipment M9000dtc, b7500hs Mar 15, 2009 56 0 6 Lindale, Texas Sep 21, 2011 #2 take the wheel off, pull the seal out, replace the seal, put the wheel back on. it takes about 30 min total.....al
take the wheel off, pull the seal out, replace the seal, put the wheel back on. it takes about 30 min total.....al
D Dad03 New member Equipment L3200HST Sep 17, 2011 34 0 0 Columbia, TN Sep 23, 2011 #3 Got the seal for $7.95 at local kubota dealer. Had to remove the brake cover to get the seal off but was all done in less than 30 minutes.
Got the seal for $7.95 at local kubota dealer. Had to remove the brake cover to get the seal off but was all done in less than 30 minutes.