Bx25d aux wiring

[Svphelan]

Hi all,

I was working on wiring my rops lights. I can't get them on. Used tester, nothing (black to red or black to red / blue.)

When I wire direct to battery they work fine.

Is there an inline fuse on the aux line?

I checked fuse panel, all the 15s are good.





Sent from my iPhone using Tapatalk

 

[Svphelan]

Hi all,

I was working on wiring my rops lights. I can't get them on. Used tester, nothing (black to red or black to red / blue.)

When I wire direct to battery they work fine.

Is there an inline fuse on the aux line?

I checked fuse panel, all the 15s are good.





Sent from my iPhone using Tapatalk

I didn't realize the work light was on the 20amp fuse. That was blown.

Now all fuses are good.

However the light only work with the heavier gauge wire. (Always on.)

I can't the lights to work with the smaller gauge wire.

Any thoughts?


Sent from my iPhone using Tapatalk

 

[100 td]

However the light only work with the heavier gauge wire. (Always on.)
I can't the lights to work with the smaller gauge wire.

Which smaller wire?
The circuit is powered when the IGN SW is ON

Red/Black, 20A fuse, circuit good for approx 15A, work lights
Red/Blue, 10A fuse, circuit good for approx 8A, DC outlet

 

[davecal]

This may sound stupid but the key must be on for the auxiliary connection to work


Sent from my iPhone using Tapatalk

 

[Svphelan]

Ok, I was an idiot. I must have Misread some info. Both the 20a and 10a fuses were blown.

Seems like the 20a is always on. Thanks for the quick response.


Sent from my iPhone using Tapatalk

 

[100 td]

The circuit is powered when the IGN SW is ON

Seems like the 20a is always on.

Should only be on when IGN switch is on.