BX25 - 3pt Hitch Manual or installation help.

[internetgardener]

Hi Everyone,

I was wondering if anyone has a copy of the manual for the BX25 3pt Hitch. When I bought my tractor (used) it came with the three point hitch ... but not installed and no manual.

I have looked at the operating manual and it looks pretty straight forward but what they don't explain is how to connect the check chain plate and the lower links the tractor. A 'short' round bar came with the hitch and I have wonder if I use that to thread between the lower links and put the chain plate on top of it. But doing that, it is really quite loose in the tractor holes (i know my explanation is probably not that good).

Anyways, if someone has a manual it would be greatly appreciated.

Thanks in advance.

 

[Artisan]

Sup!

Did you get a resolve? I am too do this deed tomorrpw and I find
the instruction sheet very lacking. By any chance do you have any pics
of just the 3PT hitch unit and how it connects and to what?

Thank YOU!

 

[gmbracing]

there are 2 bushings that go on the end of the rod. the lock in to the holes in the plates

 

[Artisan]

there are 2 bushings that go on the end of the rod. the lock in to the holes in the plates

I guess I need to see it to figure it out. I do see the 2 bushings but they
just slide on and off. I don't get it yet...

 

[gmbracing]

try this attachment

 

[Artisan]

gmbracing so I see 4 holes around the bushings, is there a plate I will see
when I pull the BH and I am to remove the plates, slip in the rod and bushings
then re-install a plate? That makes sense...

 

[gmbracing]

there shoud be nothing in the way once you remove the backhoe,the hitch should go right on