BX23S 12v accessory plug live?

SeaPro

New member

Equipment
BX23S
May 4, 2024
2
0
1
Canada
I'm about to take delivery of a new BX23S and I would like to set it up for a battery tender.

I'm wondering if the 12v accessory plug left of the seat is directly wired to the battery, or is it wired to the ignition?

If it's live to the battery, I'm kind of in favor of using that to tend the battery opposed to an sae connector wired to battery. (See attached).

I don't have an issue wiring a traditional sae connector to the battery, but I'd be keen to see if the 12v accessory would work.

Thank you in advance.
 

Attachments

NorthwoodsLife

Well-known member
Lifetime Member

Equipment
Kubota B7100(sold), Kubota LX2610 Cab
Oct 15, 2021
1,411
1,470
113
Wisconsin
Ask your dealer.

But, direct to battery terminals will supply more efficient power than a cigarette plug everytime.
 

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,
Apr 2, 2019
13,181
5,850
113
Greensville,Ontario,Canada
It's keyed ! Key on..power's there, key off, no electrons.
I have a Garmin GPS plugged in there...it's my onboard clock.

Kubota does have live power on a 'bullet' connector, blue taped, top left of top link area.
 
  • Like
Reactions: 1 user

SeaPro

New member

Equipment
BX23S
May 4, 2024
2
0
1
Canada
It's keyed ! Key on..power's there, key off, no electrons.
I have a Garmin GPS plugged in there...it's my onboard clock.

Kubota does have live power on a 'bullet' connector, blue taped, top left of top link area.
Thank you very much, I appreciate the info! Looks like I'll wire an sae connector to the battery.

I'm considering wiring up a 220w switched led work light on the rops to that blue taped wire you mentioned. I believe its a 20A fuse. Should make the wiring a little bit more tidy.

Thanks again!
 

GreenBarnAcres

New member

Equipment
BX23S
Jul 30, 2024
5
1
3
E3B 2X6
Thank you very much, I appreciate the info! Looks like I'll wire an sae connector to the battery.

I'm considering wiring up a 220w switched led work light on the rops to that blue taped wire you mentioned. I believe its a 20A fuse. Should make the wiring a little bit more tidy.

Thanks again!
Same idea, SeaPro, proof that great minds think alike. How did you make out? Thank you!
 

sagor

Active member

Equipment
BX25, BX2750D, BX2760A, 5' back blade
Jan 9, 2017
301
82
28
Sudbury, ON, Canada
For a battery tender, I wired direct to battery and ran the connector wire out the side of the BX25 console (left side). The battery tender just gets plugged in when parked. The wire from the battery has a "waterproof" cap to cover the connector, so in summer I just cap it. Both wires use the "standard" 2 pin trailer type of connector