I finally found a Quick Attach for a BX-25 on eBay and got it. The geometry is the same but it did require some mods to make it work. Apparently the BX-25 has wider arms than the BX-23 so there was some spacers needed to mount it. And then there is the question of the pins which Kubota wants $50 for. Well a little 3/4 bar stock and welding took care of that. The new fork attachment fit fairly well, but the bucket was another issue. The mounting gussets on the BX-23 bucket are not as wide as the BX-25, so the Quick Attach got ground down till the bucket fit. Sorry for the bad pictures it has been raining for several days and rainy days make good work inside days but bad picture days.