Soooo... new owner and 2nd post. Not a lot of room to work with on the BH77. Is there a thread on modifications, i.e. different seat mount or risers for the controls?!?!
BH77 Operator Station
- Thread starter SJ_Bay
- Start date
My backhoe, although different than yours, has seat adjustability, where you can unbolt it and slide it back to gain space. Is yours back as far as it can go?
I hope so, I have been so involved with getting it mounted I have not looked at it really closely,,, will inspect and advise! Thanks
I have the BH77 you can move the mount for the seat back, there is another set of bolt holes for it. Still not a lot of room but better.
M
M
dirtydeed
Well-known member
Lifetime Member
Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
There are two different sets of control stick available for the BH77. Short (10") sticks are generally used on BH77 with the second seat installed (L series and cabbed B, LX). The longer (bent) stick are used for BH77 with the reversing seat (B, LX ROPS versions). See below for details.