I purchased a 2 wheel drive B8200 for a winter project. It came with a deck in usable condition that is in pieces because the previous owner was going to "restore" the tractor.There is a 2 piece drive consisting of a disc about 7 inches and 1 inch thick with 3 holes in it.The other piece is a disc with 3 worn off pins in it that used to have bearings on them. Don't think these can be salvaged but I can't find any information on them anywhere.Any info would be appreciated.Thanks
B8200 mid mount belly mower
- Thread starter twiggly49
- Start date
Best bet would be to dig through some parts schematics to get an idea.
Site I prefer to search is:
apps.kubotausa.com
A lot of clicking and digging to be done but you'll most likely find what you need there
Site I prefer to search is:
Kubota Tractor Corporation - Illustrated Parts List
- K-PAD - Parts Lists - Illustrated Parts Lists - diagrams
A lot of clicking and digging to be done but you'll most likely find what you need there