Just finished using the B8200 for a couple days smoothing a field over. At times when I push the clutch it does not stop and stays in gear. The last few times I’ve ran the tractor it has trouble going into gear and grinds. It also has a squealing sound when I engage clutch on it’s on.
B8200 Clutch Issue?
- Thread starter Slickmullet99
- Start date
What is the switch that the pedal hits?
what is the linkage tied to the rear of the tractor? Is that supposed to move? Yes
what is the linkage tied to the rear of the tractor? Is that supposed to move? Yes
Attachments
kubotasam
Well-known member
Equipment
B2410, B7100dt, B7500,Woods BH750,Landpride 2660RFM, Tiller, B2781 Snowblower
The switch that the pedal hits is a safety switch to keep the engine from starting unless the clutch pedal is pushed down.
The rod that goes to the rear is the rod the engages the rear brakes on that side. It should only move when you push the brake pedal for that side.