Hello all! I am getting some noises from my hst 4wd that seem random but sounds like relief valve or air. Hydro fluid has no bubbles and has been changed along w filter and screen cleaned with new o rings. Not sure if it did this before because I am a new owner. I checked the diverter on the block and it is in the Ccw position against the new roll pin I installed because I have no loader atm. 3 ph seams to function and seems strong I am wondering where to tap into to check the pressure. The wsm has a pic but it’s worthless. I’m thinking one of the two internal wrench bolts on top but not sure if it’s the big one or the little one. Next I will put a gauge on the block pressure port to loader and deadhead the gauge there to read relief pressure. Thanks, any input is welcome.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk