Hey guys! How do I change the headlight bulbs on my B7800 tractor? Also wondering how to add a caution light.
B7800 headlights
- Thread starter shouse
- Start date
Daren Todd
Well-known member
Lifetime Member
Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
Quite a few of the kubotas use a twist lock plug on the back side of the light. Then the bulb is similar to the stop/turn/tail light bulbs on a trailer. And to remove the bulb it's just a push and twist.
Russell King
Well-known member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
See this link for how it works on a L185
But from looking at your parts list it seems like yours should come out the rear of the lens along with the wire/bulb holder.
But from looking at your parts list it seems like yours should come out the rear of the lens along with the wire/bulb holder.
Hi shouse. Welcome to OTT from NS, but I'm originally from Labrador.
Not sure if you have manuals for your B7800. If not go here:
http://kubotabooks.com
Under Tractor Owners Manuals there's B2710-B2910-B7800.pdf
And under Tractor Parts Manuals there's B7800HSD.pdf
They might help you out. The friendly people on here will too! How long have you had your B7800?
Oh, everyone here loves pictures of Orange Tractors.
Not sure if you have manuals for your B7800. If not go here:
http://kubotabooks.com
Under Tractor Owners Manuals there's B2710-B2910-B7800.pdf
And under Tractor Parts Manuals there's B7800HSD.pdf
They might help you out. The friendly people on here will too! How long have you had your B7800?
Oh, everyone here loves pictures of Orange Tractors.
My B7800 has the twist and lock style of bulbs. Not much point in replacing them however because they are next to useless. Shine straight into the back of the FEL.
Do yourself a favour and add some good floods to the ROPS and you'll never regret it.
Do yourself a favour and add some good floods to the ROPS and you'll never regret it.