B7200HST D

Berry

Member

Equipment
B7200HST B2551 Blower Scraper Flail Mower Chipper Log Splitter
Jun 7, 2020
133
8
18
Bancroft Ontario
Just a quick question to all you long time OUT folks. I have owned an B7200 HST D for about 4 years now. Over the 4 or so years, I have enjoyed browsing the OTT and have experienced the wealth of knowledge out there amongst the members.

Here's my question; as I browse the forum , I don't see a lot of 7200 models listed, a lot of 7100s.. I'm curious as to why, where they not that popular and is there a similar model that there questions might relate to the 7200?
Regards
 

Biker1mike

Well-known member

Equipment
B6200, Kubota 2030 Front Blade, King Cutter 60" finishing deck
Jan 11, 2022
1,174
1,274
113
Gallatin, NY USA
Berry
My 1986 B6200 owners manual shows the 5200, 6200 and 7200 as the same size with different horse power and slight tire options. There is no HST version in the manual , that may be a year difference.
The only other b6200 I have heard of or seen is in the used/scrap area of my local tractor dealer. I 've had this for 20 years and the 3 digit hour meter has been turned over several times. This little beast just will not quit.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
33,173
8,557
113
Sandpoint, ID
There were less of the B7200's made than the B7100's.
The B8200 was a more popular model and it's just a little bigger version of the B7200.
 

Berry

Member

Equipment
B7200HST B2551 Blower Scraper Flail Mower Chipper Log Splitter
Jun 7, 2020
133
8
18
Bancroft Ontario
Berry
My 1986 B6200 owners manual shows the 5200, 6200 and 7200 as the same size with different horse power and slight tire options. There is no HST version in the manual , that may be a year difference.
The only other b6200 I have heard of or seen is in the used/scrap area of my local tractor dealer. I 've had this for 20 years and the 3 digit hour meter has been turned over several times. This little beast just will not quit.
Thanks Biker, good to hear it keeps on ticken. I have to say how amazed I am what my 7200 still does and how smooth it runs. As far as the hour meter goes, mine is at 840 and only heaven knows how many times it has been around.