And there must be demand/reason they now make regular Ssqa for a full size skid to a mini skid adapter. Its to use mini skid attachment on a full size skid. Go figure, why is that if you can get every attachment u need for a full size skid?
hmm, is that an A-C G hiding in there, without it's covers on ??Heres what im starting with. Got the loader off the gear drive 7200. And the under mount almost off. The loader is going on the hst 7200.
View attachment 159743 View attachment 159744 View attachment 159745 View attachment 159746 View attachment 159747
I'm jealous.Got the new full size skid plates. Will take all the hardware off. Cut one down to fit in mini skid plates already. u can see in the pic. May be able to use pin side too.
Got some brackets made up to the loader mounts. Drilled 12 holes total with 4 in the wrong location lol. 2 square tubing will be welded on and between. Then miniskid mounts welded on to these. Then all kinds of support pieces where needed.
View attachment 160060 View attachment 160061 View attachment 160062 View attachment 160063
Yes you can flip the cylinder. Just be aware the hoses will be moving as cylinder is opened/closed. Hopefully there is enough slack in them.Yea didnt ser that coming either. Just have to work around it somehow. Can i turn this cylinder clockwise as you are looking at this pic 180 degrees? Should work the same i thThat might help me View attachment 160254