B3300 with LA 504 loader SSQA Conversion

[TPAC]

Hello
About 15 years ago when i bought my B3300 with an LA504 loader i don't remember my dealer offering the SSQA option. So i ended up with a pin on set up for the bucket and pallet fork attachment which has worked just fine to this point. Now, getting more into working around the property i want a stump bucket and a snow pusher.
I would like to convert the pin on set up with a SSQA using Kubota factory parts to facilitate the use of other bucket attachments.
Has anyone else converted their B3300/LA504 to SSQA?

 

[Runs With Scissors]

Are you looking for a “store bought-bolt on” solution, or is this going to be a “homemade” job?


I have never done one, but if I had a pin-on bucket, it would be very high on my priority list.


Do a search and you should find some posts to help you out.


Heres a start for ya…


Good luck, and if you do attempt it, take lots of pics and post your story.



https://www.orangetractortalks.com/forums/threads/quick-attach-options.55978/#post-729512

 

[PoTreeBoy]

Hello
About 15 years ago when i bought my B3300 with an LA504 loader i don't remember my dealer offering the SSQA option. So i ended up with a pin on set up for the bucket and pallet fork attachment which has worked just fine to this point. Now, getting more into working around the property i want a stump bucket and a snow pusher.
I would like to convert the pin on set up with a SSQA using Kubota factory parts to facilitate the use of other bucket attachments.
Has anyone else converted their B3300/LA504 to SSQA?

I don't think Kubota made SSQA for your model. According to the Kubota parts info, the B3300/LA504 offered an optional Kubota quick hitch, not SSQA. An ATI Tach-All is available for your loader. Then you'd need to convert your bucket and forks. Or, if you have the means, you could buy the latches and fabricate your adapter.

 

[TPAC]

I was hoping to get a Kubota SSQA coupler with the correct dimensions that would pin onto my loader arms/tilt rams.

Did some measuring on my tractor yesterday and as close as i can tell a Kubota B2366 / pn: 7J056-36103 coupler will work.... i think?

Thanks, and i will defiantly take a boat load of pictures and post my progress.

 

[PoTreeBoy]

I was hoping to get a Kubota SSQA coupler with the correct dimensions that would pin onto my loader arms/tilt rams.

Did some measuring on my tractor yesterday and as close as i can tell a Kubota B2366 / pn: 7J056-36103 coupler will work.... i think?

Thanks, and i will defiantly take a boat load of pictures and post my progress.

I think you're right. The ATI only shows 3 models that their adapter fits. I searched Options for the LA534, which is where the quick hitch for the LA504 was, but the adapter is under Front Attachments. So much for consistency .

Did you see this thread?

B2366 loader adapter to ssqa

I have a new Kubota B2366 loader adapter to replace a pin-on bucket with a skid steer quick attach setup. I used a similar piece on my B2910 with LA402 loader to convert so that I could quickly change implements (bucket to skid steer forks mostly for me). Also called a quick hitch. The B2366 is...

www.orangetractortalks.com

 

[North Idaho Wolfman]

I was hoping to get a Kubota SSQA coupler with the correct dimensions that would pin onto my loader arms/tilt rams.

Did some measuring on my tractor yesterday and as close as i can tell a Kubota B2366 / pn: 7J056-36103 coupler will work.... i think?

Thanks, and i will defiantly take a boat load of pictures and post my progress.

Yes the B2366 adapter bolts right on.
The problem is they have been out of production for a long time.
So your chances of finding one is going to be really hard.