B2530 sump removal

Leaky Rabbit

New member

Equipment
kubota b2530hd
Nov 6, 2026
1
0
1
Kent
Hi, Ive recently been given a b2539hd and on draining the sump and lifting the head I can see why. When water comes out it’s never a good thing. What i am asking is whether I need to take off the front axle to remove the sump? I’m hoping to be able to strip and put new liners in without doing a complete engine removal.
 

PoTreeBoy

Well-known member
Lifetime Member

Equipment
L35 Ford 3930
Mar 24, 2020
4,110
2,532
113
WestTn/NoMs
I'm surprised you haven't been answered. I'm no engine expert, but I'm 98% sure your engine has dry liners. Meaning the liners have to be bored to size after installation, meaning the engine has to come out. Which means you're better off to do full overhaul while it's out.

What condition are the cylinders in? Maybe the head is cracked?
 
  • Like
Reactions: 1 user

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
36,786
11,493
113
Sandpoint, ID
Hi, Ive recently been given a b2539hd and on draining the sump and lifting the head I can see why. When water comes out it’s never a good thing. What i am asking is whether I need to take off the front axle to remove the sump? I’m hoping to be able to strip and put new liners in without doing a complete engine removal.

Like @PoTreeBoy said you can not do a liner job in the tractor, it requires the engine to be completely torn down and machine pressed and bored.
Now liners have Zero to do with a collant issues, so if that's why your taking it apart you need to rethink things.
Most common issue if the coolant goes into the oil pan very quickly would be a popped out frost plug on the front of the block under the gear case.