B2401 Step

[robin416]

Does anyone know where I might find a left hand step for my little tractor?

Being of the older persuasion my achilles tendon is having a fit at me from climbing up repeatedly from the ground.

Everyone, I'm sorry. I screwed up and put the wrong model in the header. No excuse other than I didn't catch my mistake.

 

[muskynut]

Just added a step to my B2601. P/N below is for a B2650 but fit fine. I do not use a MMM, so if you plan to it may interfere.
Step part Number 6A700-51350
5/16 x 3/4 SS bolt/washers/nut

 

[robin416]

Thanks, I can't use that one without drilling holes into the platform of the tractor. The holes for the 2601 are all in the flat part of the platform.

 

[lynnmor]

Thanks, I can't use that one without drilling holes into the platform of the tractor. The holes for the 2601 are all in the flat part of the platform.

Check again, it fit just fine on my B2601. You don't use the holes in the tread area.

 

[muskynut]

Go to YouTube and search gpoutdoors/B2601/step to see the install.

 

[robin416]

Go to YouTube and search gpoutdoors/B2601/step to see the install.

I've seen his video. I do not have the two holes on the upright part of my deck. I just came in from double checking.

 

[Bonanza 2026]

Aftermarket step for the Kubota B2601

The is a user report on the installation of an aftermarket step for the Kubota B2601. Parts: Step 6A70051350 aftermarket from ebay Listed under E-6A70051350 LH Step for Kubota from eparts.shop Price was $63 versus $161 for the OEM version. No bolts are included - you need to find your own...

www.orangetractortalks.com

 

[whitetiger]

Are you wanting to put a step on a B2401 or a B2601?

 

[robin416]

Are you wanting to put a step on a B2401 or a B2601?

2401. I did a typo in the header. I need to see if I can fix it.

I haven't found one even close to fitting on my tractor.

 

[muskynut]

2401. I did a typo in the header. I need to see if I can fix it.

I haven't found one even close to fitting on my tractor.

 

[muskynut]

Is it a standard or narrow (DTN) version?

 

[robin416]

Standard 4wd