B-7800 Broken front Axle

[Speedybon]

I over loaded my front and a snap the front axle. Has anybody replace the front hub/axle ass. I removed the studs and chase with a die and they seem to be Ok do I need the gsk for the eight bolt cover and It looks like a C clip retains it. What would you recommend for front Gear Oil. Any help would be appreciated.

 

[Motion]

Your WSM will have the correct lubricant. A good 80-90 gear oil would probaly be OK. It must have been a good size load, I'll bet it got your attention.

 

[Henro]

If you don't have a WSM you can download one for the B7800 for free, or preferably for a small donation, at kubotabooks.com.

Download the workshop manual for the B2710, B2910 and you will see there is an appendix in the back that explains it also covers the B7800.

Same tractor as the B2910, just that the B7800 is missing some deluxe features.

 

[Speedybon]

Your WSM will have the correct lubricant. A good 80-90 gear oil would probaly be OK. It must have been a good size load, I'll bet it got your attention.

 

[Speedybon]

My bad. I had pallot fork entensions and it was at maxium load. Does anybody know it I need anything else beside the hub/axle ass. Gks, C clip?

 

[Pau7220]

Some clear pics would say 1000 words…..