Attaching a BH77 backhoe to an L3200

[sepp60]

When attaching a BH77 backhoe to an L3200 tractor which implements on the backside of the tractor need to be removed. Obviously, the three-point hitch attachments need to come off but I am concerned about leaving the drawer bar at the bottom in place in case it interferes with the hydraulic pistons of the backhoe. Anybody have any ideas ?

 

[DocGP]

Take it all off. Doesn't take that much longer. I have the BH92 for an MX 5100 and it takes about 20 min for me to do it by myself. No big deal, but I would rather take everything off than chance something tearing loose a hydraulic hose.

Doc

 

[Tweetybrun]

The draw bar can be left on. It does not interfere with the BH.

 

[Ryansweatt2004]

The draw bar can be left on. It does not interfere with the BH.

Thats good to know, Im going to try that with mine

 

[Sammy3700]

I have a BH 77 on a L3700SU and I remove the draw bar just to be safe.