anyone familliar with denso injector nozzels?

[dieseldude]

Just asking around for some knowledge of some nozzel numbers. I'm in the process of rebuild yet another engine, but have hit a brick wall rebuilding the injectors. it seems Denso no longer makes the original DN4PD1 nozzels. Just for kicks I tried a used one from another rebuild, number DN4PD62, and it seem to work. Am I missing something here or can any DN4**** number be used? Any info is much appreciated.

Thanks.

 

[bh115577]

Not sure if any DN4 nozzle will work but I may have a file at work with some info. I'll check tomorrow and post back if it will help.

It looks like some Toyota injectors used the same nozzle according to this link: http://www.ebay.com.au/itm/DENSO-TO...N844-NEW-INJECTOR-NOZZLE-DN4PD1-/141643416117


This link has the nozzle listed under the stamping number but I didn't see any other helpful info unless you can use some of the part numbers: http://starsdiesel.com/Kubota Injector-3762.htm

 

[dieseldude]

Thanks.
In the mean time I called a few injection shops and one could get those nozzels. Good price too, $36 for the part and $15 to set the pressure. 3 rebuilt injectors for about $125. I cant do it myself that cheap.