Put 3 hours on my new MX5400 cleaning up my 400 foot driveway. We just completed our house build and nothing had been done to this driveway in 7 months. Just got tractor last week and my plan was to use my 72” scraper to get it back to an acceptable level.
I split the width in 5 sections. 2 on either side of center. Turned the blade so I would drag gravel to center. Made 3 passes on each section The last 3 passes were down center. it made a huge difference but not 100% satisfied. This was my first time using the tractor and I would say I am 80% there.
My question is I didn’t spin the blade around on the last passes. Should I?
Thanks
I split the width in 5 sections. 2 on either side of center. Turned the blade so I would drag gravel to center. Made 3 passes on each section The last 3 passes were down center. it made a huge difference but not 100% satisfied. This was my first time using the tractor and I would say I am 80% there.
My question is I didn’t spin the blade around on the last passes. Should I?
Thanks